Firing Tables Manager

FIRING TABLES MANAGER

Firing Table selection and Download

• All the Download operation is conducted with one single Control Panel in the Manager Window
• The Firing Table selection is done with the Script Filter Manager, as explained in the Script File Section.
• If no Filter is used, all cues are taken to make a unique Firing Table for Download.
• The number of selectable ports is 16. The port with the Field Controller connected, will show the mark <<

If you have used Filters to separate and specify each Firing Table, the Script Filter Manger will look like this:

And the Firing Table Manager, like this:

Field Controller: Selects the Field Controller Number. Firing Tables: Selects the number of Tables in conjunction with The Field Controller Memory settings.

Serial Port: Chooses the serial port to send the data to the Field Controller.

Status: Shows the status of the Firing Table: Pending, Downloaded or Failed

If you make a change in the Script, make sure to click UPDATE or UPDATE ALL, to reflect the changes in the file downloaded to the Field Controller (.tab)

Click DOWNLOAD and follow the messages to download to the Field Controller.

OK. Saves the settings and exits the Firing Table Manager.

PYROINFINITY FIRING MANAGER

This new firing table manager is used to create firing files for FireDirector control software  and to program Monetti SQ3 sequencers.

You can download each SQ3 individually. Tables for each module are created automatically by Show Director.
For operation of the Monetti SQ3 refer to its user's guide.

Created with the Personal Edition of HelpNDoc: Easily create Help documents